Table of Contents
Advertisement
4.3.2 Installing the ARC downloading kit
The ARC downloading kit interfaces the SMT software with the phone to be repaired.
-Connect the 9-pin SUB-D connector to the PC serial port (COM1).
-Connect the power supply module to the mains power outlet.
-Connect the phone to be repaired to the system connector.
4.3.3 SMT functions
The SMT maintenance software can:
-Download new software if needed
-Configure default values and checks them.
-Unblocked the " PHONE CODE "
-Delete the customer directory and SMS
-Print identification labels.
-Make a electronic board swap.
-Adjust the display contrast
-Read the Site Technical Documentation ( manual of repair)
-Select a test sequence
The procedures for using these functions are described in TEST Sheet 01.
Contents
REF MTB DTS 9- Indice B - December 09 2005
Site technical documentation EC 2005 myZ 5
Page 4-2
Advertisement
Table of Contents
