Catalyst Rsm/Vip2 Interface Addresses - Cisco PA-E3 Series Installation And Configuration Manual

Identifying Interface Addresses
Table 1-2 Identifying Interface Addresses (continued)
Platform
Cisco 7200 series routers
and Cisco 7200 VXR
routers
Cisco uBR7223 router
Cisco uBR7246 router
Cisco 7201 router
Cisco 7301 router
Cisco 7304 PCI Port
Adapter Carrier Card in
Cisco 7304 router
Cisco 7401ASR router
VIP in Cisco 7000 series or
Cisco 7500 series routers
1. Slot 1 is reserved for the supervisor engine. If a redundant supervisor engine is used, it must go in slot 2; otherwise, slot 2 can be used for other modules.
2. Port adapter slot 0 is reserved for the Fast Ethernet port on the I/O controller (if present).
3. Port adapter slot 0 is reserved for the Fast Ethernet port on the I/O controller (if present).

Catalyst RSM/VIP2 Interface Addresses

In Catalyst 5000 family switches, the Catalyst RSM/VIP2 can be installed in any slot except the top slots,
which contain the supervisor engine modules. The Catalyst RSM/VIP2 in a Catalyst 5000 family switch
does not use interface processor slot numbering; therefore, the slots in which it is installed are not
numbered. A port adapter can be installed into either port adapter slot 0 or slot 1 on a Catalyst
RSM/VIP2. See
The interface address is composed of a two-part number in the format
port-adapter-slot number/interface-port number. See
installed in port adapter slot 1 of a Catalyst RSM/VIP2 in a Catalyst 5000 family switch, the interface
address would be 1/0. If a dual-port PA-2E3 is installed in port adapter slot 1 of a Catalyst RSM/VIP2
in a Catalyst 5000 family switch, the interface addresses would be 1/0 and 1/1.
PA-E3 Serial Port Adapter Installation and Configuration
1-16
Interface Address Format
Port-adapter-slot-number/interface-port-number
Port-adapter-slot-number/interface-port-number
Port-adapter-slot-number/interface-port-number
Port-adapter-slot-number/interface-port-number
Port-adapter-slot-number/interface-port-number
Module-slot-number/interface-port-number
Port-adapter-slot-number/interface-port-number
Interface-processor-slot-number/port-adapter-slot-
number/ interface-port-number
Figure 1-6.
Numbers
Port adapter slot—1 through
6 (depends on the number of
slots in the router)
Interface port—0
Port adapter slot—always 1
Interface port—0 or 1
Port adapter slot— 1 or 2
Interface port—0 or 1
Port adapter slot—always 1
Interface port—0 or 1
Port adapter slot—always 1
Interface port—0 or 1
Module slot—2 through 5
Interface port—0 or 1
Port adapter slot—always 1
Interface port—0 or 1
Interface processor slot—0
through 12 (depends on the
number of slots in the
router)
Port adapter slot—0 or 1
Interface port—0 or 1
Table 1-2. For example, if a single-port PA-E3 is
Chapter 1 Overview
Syntax
1/0
2
3
1/0
3
1/1
1/0
1/0
3/0
1/0
3/1/0
OL-3502-04