Philips XC8147/01 Instruction Manual page 7

- Be careful when you drill holes in the wall to attach the wall
fixture, to avoid the risk of electric shock.
- If you use the appliance to vacuum fine sand, lime, cement dust
and similar substances, the pores of the filter will become
blocked. Clean the filter regularly.
- As this appliance uses water to clean, the floor may remain wet
and slippery for a while (Fig. 3).
- To prevent damage, never put wax, oil, floor maintenance
products or liquid floor cleaners that are not water-dilutable in
the water tank.
- Only use liquid floor cleaners that are transparent. Do not use
milky or non-transparent floor cleaners.
- Do not mix different types of liquid floor cleaner. When you have
used one liquid floor cleaner, first empty and rinse the water tank
before you add another liquid floor cleaner to the water in the
water tank.
- Never exceed the maximum quantities mentioned on the bottle
when you use a liquid floor cleaner. Do not add more than a few
drops to the water in the water tank, as this tank has a capacity of
200ml.
- Do not clean the metal wetting strip with a sharp object, as this
may damage the strip. Only clean the wetting strip by rinsing it
under the tap. Replace the wetting strip when you can no longer
clean it.
- Replace the wetting strip only with an original strip.
- To guarantee good cleaning results and proper functioning of the
appliance and water tank, always use original Philips cleaning
pads.
- Clean the water tank according to the instructions. The water tank
is not dishwasher-proof.
- Do not use aggressive cleaning agents or tools to clean the Aqua
Boost pedal (Fig. 4).
English
9