Philips XC8147/01 Instruction Manual page 10

English
12
User interface signals and their meaning
Signal Description of signal
The signal '00' and the battery icon flash on the
display.
A number between '00'and '90' flashes on the
display.
The number '100' lights up on the display.
The battery symbol lights up on the display.
A number between '00' and '10' together with the
battery icon flash on the display.
The display shows a flashing square and the
orange filter cleaning icon also flashes.
Error code 'E1' lights up on the display.
Error code 'E4' lights up on the display.
Error code 'E6' lights up on the display.
Error code 'E7' lights up on the display.
Error code 'SE' lights up on the display.
Meaning of signal
The battery is empty.
The appliance is charging.
After a full charging cycle, this signal
appears to show that the
rechargeable battery is fully charged.
The appliance is in standby mode
with a fully charged battery.
The rechargeable battery of the
appliance is low.
It indicates the recommended time
to check and clean the filter (Fig. 10)
to ensure the best performance of
the appliance.
The appliance is stored or charged at
a temperature below 5 °C. Move the
appliance to a warmer room. Do not
store or charge the appliance at a
temperature below 5 °C or above
40 °C.
The roller brush in the motorized
nozzle or in the mini turbo brush has
become blocked and cannot turn
freely. Switch off the appliance and
check the roller brush for
obstructions or excessive hair
pollution.
The adapter or battery may be
defective, please contact the
Consumer Care Center or take the
appliance to an authorized Philips
service center.
The adapter may be defective,
please contact the Consumer Care
Center or take the appliance to an
authorized Philips service center.
SE stands for service. Please take the
appliance to an authorized Philips
service center.