Key To Symbols; Brakes; Front Brake; Rear Brake - Beta Motorcycles Xtrainer 300 2T 2020 Owner's Manual

3
M03_L0017
M03_L0018
4
5
M03_L0014
EN
1
2
1A
3

KEY TO SYMBOLS

Tightening torque
Threadlocker Medium

BRAKES

FRONT BRAKE

The front brake is disk type with hydraulic
control.
The home position of brake lever 2 can be
adjusted by means of screw 1.
Warning! Once the adjustment has
been made, tighten the locknut 1A.
Warning! Do not remove the locknut
for any reason 1A.

REAR BRAKE

The home position of brake pedal 3 can
be altered by turning adjusting screw 5 af-
ter loosening the counternut located under
dust cap 4. Loosen the counternut and turn
the adjusting screw until the desired height
is obtained. Retighten the counternut after
completing the operation.
36