Disabling Or Changing A System Password - Texas Instruments 900 Series User Manual

Using System Passwords
If you set a password, you are prompted for the
new password before starting your computer or
entering Setup.
Disabling or Changing a
System Password
To disable or change a system password:
1. Press Fn+F1 (or F2 during boot) to enter
2. Enter your password when prompted.
3. Press the arrow keys to move to
4. Move down the screen to a Password
Note: You can only change the User password if
you used the User password to enter Setup. You
can change both the User password and the
Supervisor password if you used the Supervisor
password to enter Setup.
5. Enter a new password to set a new password,
6. Save the changes then exit Setup.
5-8
Setup.
parameter, then press Enter.
or press Enter with no entries to clear the
password. Verify your entry, then press
Enter.
.
SECURITY