Ejecting Pc Cards - Texas Instruments 900 Series User Manual

Using PC Cards
In Windows for Workgroups
Windows for Workgroups beeps to indicate it has
detected the card. If a driver for the PC card has
already been loaded, you can use the card
immediately. If a driver has not been loaded,
you must manually load the driver. Windows for
Workgroups does not ask you to load a driver.

Ejecting PC Cards

Eject buttons are located beside each PC card
slot. Pressing an eject button ejects the PC card
from the slot. To eject a Type III card, press both
eject buttons.
2-10
PC Card
Eject Buttons
PC Card Eject Buttons