Re-Installing The Battery Locks - Texas Instruments 900 Series User Manual

Removing and Installing the

Re-installing the Battery Locks

The battery locks are designed to not break, but
come off easily when they have been forced open
too far.
To re-install the battery locks, follow these
instructions:
Note: The left and right battery locks are not
interchangeable.
1. Align the battery lock with the edge of the
computer as shown in the figure below.
Slide
Right
2. Push the lock to the right (for the left battery
lock) and to the left (for the right battery lock)
until the lock(s) are flush with the computer.
Flush
Aligning the Battery Locks
Battery Pack
3-11