Using A Password - Texas Instruments TravelMate 4000M User Manual

Using a Password

You may install the Password Utility from the System Recovery diskette that
came with your system. 'Ibis utility limits unauthorized access to your
computer. The password is valid until you remove or change it using the
Password utility.
To install the Password Utility, complete the following steps:
1.
2.
3.
After installing a password, Enter Password appears every time you start up the
computer.
3-8
put the System Recovery diskette into your floppy drive and type:
A:\INST_PW
The password is automatically installed in the following directory:
C:\UTILS\PASSWORD
At the MS-DOS C: prompt, type
UTILS\PASSWORD\PW
and press Enter.
The Password Utility menu appears. From this menu, you can install,
change, or remove a password or exit the utility.
To select a Password command, press the initial character of the
prompt or press the up or down arrow keys to highlight the desired
command. Press Enter.