Pump Description - Agilent Technologies TV 551 Navigator User Manual

Figure 9

Pump Description

The pump consists of a high frequency motor driving a turbine fitted with 8
bladed stages and 4 Macrotorr stages. The turbine rotates in an anticlockwise
direction when viewed from the high vacuum flange end.
The turbine is made of high-strength aluminium alloy, machined from a single
block. Proceeding from the high vacuum to the for vacuum region, the turbine
stages sequence is:






The Macrotorr stages are in the form of four discs.
The turbine rotor is supported by permanently lu-bricated high precision
ceramic ball bearings in-stalled on the forevacuum side of the pump.
TV 551/701 Navigator User Manual / 87-900-934-01 (P)
Model 9698837
1st stage with a blade angle of 40°,
2nd stage with a blade angle of 34°,
3rd stage with a blade angle of 28°,
4th and 5th stages with a blade angle of 24°,
6th stage with a blade angle of 20°,
7th and 8th stages with a blade angle of 16°.
Technical Information
Description of the TV 551/701 Navigator
17
265/328