Heater Band Installation - Agilent Technologies TV 551 Navigator User Manual

Heater band installation

Figure 37
The heater band model 9699808 and 9699807 can be used to heat the pump
casing when a bakeout is needed.
The heater band is applied to the upper part of the pump casing, as shown in
the figure, and heats it to a temperature of about 80 °C.
The heater band must be mounted such that there is perfect thermal contact
with the pump wall to obtain fast and efficient heating.
Figure 38
TV 551/701 Navigator User Manual / 87-900-934-01 (P)
Technical Information

Heater band installation

17
299/328