senseFly eBee X User Manual page 59

2. The motor spins up to full power, ready for take-off.
The status LED will pulse blue until the motor is at full power and ready for
take-off.
Caution: Take great care not to touch the spinning propeller with
your clothes or a part of your body.
Note: To abort the take-off and shut off the motor, just shake the
drone 3 times again, (repeat the back and forth action three times).
Always wait at least 2 minutes between take-off attempts to allow
the motor to cool.
Caution: Once the motor is at full power and the LED is green, you
have 15 s to launch the drone. After 15 s the motor cuts out and you
cannot take off again for 2 minutes.
Flying the eBee X
59