Take-Off And Landing Spots - senseFly eBee X User Manual

Using your eBee X
11.4 Take-off and landing spots
The Take-off and landing phase of a flight includes the locations and actions related
to the drone's take-off and landing and includes the following:
• Take-off spot:
The point from which the drone is launched, automatically set to the loca-
tion calculated from GNSS signals by the drone. This location defines the
altitude of 0 m/ATO (0 ft/ATO) where /ATO stands for above take-off; the
altitudes of all other waypoints, when defined in m/ATO (ft/ATO), are refer-
enced to the altitude of this location.
• Start waypoint:
The Start waypoint is the first point that the drone goes to when it starts an
autonomous flight.
• Landing spot:
The point, directly under Home, at which the drone will land at the end of
an autonomous mission, after having visited Home.
• Home waypoint:
The Home waypoint is the point that the drone will head to at the end of
an autonomous mission. It is also the point it will head to if it encounters a
problem during flight.
See your eMotion user manual for instructions on placing and editing take-off and
landing spots.
50