senseFly eBee X User Manual page 35

holes in the probe are free of obstructions.
3. Verify that the ground sensor is clean, dry and free of obstructions.
4. Verify that the wing struts are not split or damaged in any way.
5. Verify that the tubes within the Central Body that hold the wing struts are
not cracked or damaged in any way.
Caution: It is vital to carefully inspect the wing struts and tubes
within the Central Body before every flight, as they may cause a crash
if they are damaged in any way. This is particularly important if the
wings were found separated from the Central Body after a previous
flight.
6. Verify that the servos turn smoothly.
7. Verify that the propeller rubber bands are all in place and are in good con-
dition.
8. Verify that the propeller is in good condition for flight and is properly at-
tached.
9. Verify that the power cables within the battery compartment are well insu-
lated and not damaged.
10. Verify that the camera's lens is clean.
Note: You must perform a general inspection before every flight. It is
also good practice to perform a full airframe check regularly to keep
your eBee X in good shape.
See also Full airframe and sensor inspection on page 79.
Getting the eBee X ready to fly
35