Editing A List Element - Texas Instruments TI-83 Manual Book

Editing a List Element

To edit a list element, follow these steps.
1. Move the rectangular cursor onto the element you want to edit.
2. Press Í to move the cursor to the entry line.
Note: If you want to replace the current value, you can enter a new value
without first pressing Í. When you enter the first character, the current
value is cleared automatically.
3. Edit the element in the entry line.
Press one or more keys to enter the new value. When you enter
the first character, the current value is cleared automatically.
Press ~ to move the cursor to the character before which you want
to insert, press y 6, and then enter one or more characters.
Press ~ to move the cursor to a character you want to delete, and
then press { to delete the character.
To cancel any editing and restore the original element at the
rectangular cursor, press ' Í.
TI-83 Plus Statistics 334