158
Chapter 11: Lists
To cancel any editing and
restore the original element
at the cursor, press :
b .
You can enter an expression
as an element.
Displaying and Editing a List Element
Move the cursor onto the fifth element of
ABC123
. In the entry line, the list name,
the element number in parentheses, and
the element's full value are displayed.
Switch to edit-element context and edit the
element in the entry line.
Enter the edited element. Any expression
is evaluated and the value is stored to the
current element.
Deleting Elements from a List
To delete a single element from a list, move the cursor onto the element and press 3. The
element is deleted. You can clear all elements from a list in any of three ways.
In the list editor, press $ to move the cursor onto a list name and press : b.
In the list editor, move the cursor onto each element, and then press 3 one by one.
On the home screen or in the program editor, enter
dimension of listName to
Removing a List from the List Editor
To remove a list from the list editor, move the cursor onto the list name and then press 3.
The list is not deleted from memory; it is only removed from the list editor.
# # # # #
M D
5
6
F
4
b (or # or $)
(A to Z Reference).
0
- ~ E
listName to set the
0¶dimL