Texas Instruments TI-83 Manual Book page 638

SEND RECEIVE
G:SendOS
H:Back Up...
When you select an item on the
screen is displayed.
SELECT
Note: Each
SELECT
selected. is displayed with everything pre-selected.
All+...
To select items to send:
1. Press y 8 on the sending unit to display the
2. Select the menu item that describes the data type to send. The
corresponding
3. Press } and † to move the selection cursor (
to select or deselect.
TI-83 Plus Communication Link
Sends operating system updates to another
TI-83 Plus Silver Edition
Selects all RAM and mode settings (no Flash applications
or archived items) for backup to another
TI-83 Plus Silver Edition
LINK SEND
screen, except
All+...
screen is displayed.
SELECT
or TI-83 Plus.
or to a TI-83 Plus.
menu, the corresponding
, is initially displayed with nothing pre-
) to an item you want
4
menu.
LINK SEND
635