Sending Lists To A Ti-82 - Texas Instruments TI-83 Manual Book

Note: You cannot perform a RAM memory backup from a
or from a TI-83 to a
To send data to a TI-83:
1. Use a unit-to-unit cable to link the two units together.
2. Set the TI-83 to receive.
3. Press y 8 on the sending
menu.
4. Select the menu of the items you want to transmit.
5. Press ~ on the sending
6. Confirm that the receiving unit is set to receive.
7. Press Í on the sending
transmitting.

Sending Lists to a TI-82

The only data type you can transmit from a
list data stored in
dimension is greater than 99 for a
sent, the receiving TI-82 will truncate the list at the ninety-ninth element
during transmission.
TI-83 Plus Communication Link
TI-83 Plus.
TI-83 Plus
TI-83 Plus
through (with up to 99 elements for each list). If
L L
1 6
TI-83 Plus to display the
to display the
to select
TI-83 Plus
TI-83 Plus list that is selected to be
TI-83 Plus to a TI-83
LINK SEND
LINK TRANSMIT
and begin
1:Transmit
to a TI-82 is real
menu.
641