Receiving From A Ti-83 Plus Silver Edition Or Ti-83 Plus - Texas Instruments TI-83 Manual Book

DuplicateName
1:Rename
2:Overwrite
3:Omit
4:Quit
When you select
lock is on. Enter a new variable name, and then press Í.
Transmission resumes.
When you select
existing data stored on the receiving unit. Transmission resumes.
When you select
duplicated variable name. Transmission resumes with the next item.
When you select
receive mode.

Receiving from a TI-83 Plus Silver Edition or TI-83 Plus

The TI-83 Plus Silver Edition
Keep in mind, however, that the TI-83 Plus has less Flash memory than
a TI-83 Plus Silver
TI-83 Plus Communication Link
Prompts to rename receiving variable.
Overwrites data in receiving variable.
Skips transmission of sending variable.
Stops transmission at duplicate variable.
, the
1:Rename
, the sending unit's data overwrites the
2:Overwrite
, the sending unit does not send the data in the
3:Omit
, transmission stops, and the receiving unit exits
4:Quit
Edition.
prompt is displayed, and alpha-
Name=
and the TI-83 Plus are totally compatible.
645