Connecting The Supply Lines; Surfaces For Mounted Parts Or Cable Fixing Elements; Connecting The Cooling Water Supply; Figure 5-3 Areas For Mounting Parts - Siemens SIMOTICS HV M Operating Instructions Manual

See also
Service and Support (Page 121)
5.4

Connecting the supply lines

5.4.1

Surfaces for mounted parts or cable fixing elements

The surfaces on the enclosure are marked to which you can attach components or cables.
If you drill through the side panel, then seal the holes so that they are airtight.
Figure 5-3
5.4.2

Connecting the cooling water supply

Documentation
Please refer to the operating instructions provided by the manufacturer of the heat exchanger
in Chapter "Additional documents (Page 129)". For the operating data of the air-to-water heat
exchanger, refer to the rating plate on the machine or the information about the dimension
drawing in the appendix.
SIMOTICS HV M 1RN76308PR900CG0-Z
Operating Instructions 07/2018
Areas for mounting parts
Shaft height
800
710
630
5.4 Connecting the supply lines
Height H
1065
910
760
Assembly
Panel/wall thickness T
15
12
10
55