Thermal Protection; Transport And Storage; Transport Markings; Table 4-1 Power Limits - Siemens SIMOTICS HV M Operating Instructions Manual

Example
This current limit corresponds to the following upper power limits, depending on the relationship
between the starting current I
20%) while the machine is starting up:
Table 4-1
See also
Prior to commissioning (Page 71)
4.14

Thermal protection

The machine is equipped with measuring equipment to directly monitor the motor temperature
to protect the machine against overheating during operation. Plan a corresponding circuit for
monitoring. You will find more information in the Technical Data in the "Explanatory text for the
machine dimension drawing".
4.15

Transport and storage

Observe the following when carrying out any work on the machine:
● Comply with the general safety instructions (Page 13)
● Comply with the applicable national and sector-specific regulations at the place of
● When using the machine within the European Union, comply with the specifications laid
4.15.1

Transport markings

The packing differs depending on the transport type and size. If not otherwise contractually
agreed, the packaging corresponds to the packing guidelines for International Standards for
Phytosanitary Measures (ISPM).
SIMOTICS HV M 1RN76308PR900CG0-Z
Operating Instructions 07/2018
Power limits
Rated voltage V
3 kV
6 kV
10 kV
installation
down in EN 50110‑1 regarding safe operation of electrical equipment.
and rated current I and on the voltage dip (up to approximately
A N
N
Preparations for use
4.14 Thermal protection
Power limit
750 kW
1500 kW
2500 kW
27