Description; Table 3-1 Machine Design - Siemens SIMOTICS HV M Operating Instructions Manual

Description

Applications
This electrical machine is designed for driving rotating machines in industrial environments
and also for energy conversion. It is characterized by a high level of safety, long lifetime, and
overall reliability.
For details of the machine supplied and the permissible operating conditions, refer to the
"Technical data and drawings" (Page 123) section in the Appendix of these Operating
Instructions.
The machine was designed in accordance with the ordering party's specification and may only
be used for the contractually agreed purpose.
Risk of explosion
This machine is not designed for use in hazardous areas. An explosion can occur if the
machine is operated in these areas. This can result in death, serious injury or material damage.
● Never operate this machine in hazardous areas.
Machine design
The regulations and standards used as the basis to design and test this machine are stamped
on the rating plate.
The machine design basically complies with the subsequent standards. Please refer to the EU
Declaration of Conformity for the versions of the harmonized standards referenced.
Table 3-1
Feature
Rating and performance
Degree of protection
Cooling
Type of construction
Terminal markings and direction of rotation
Noise emission
Starting characteristics, rotating electrical machines
Vibration severity grades
Vibration limits
* For machines in line operation only
SIMOTICS HV M 1RN76308PR900CG0-Z
Operating Instructions 07/2018
WARNING
Machine design
3
Standard
IEC/EN 60034‑1
IEC/EN 60034‑5
IEC/EN 60034‑6
IEC/EN 60034‑7
IEC/EN 60034‑8
IEC/EN 60034‑9
IEC/EN 60034‑12*
IEC/EN 60034‑14
DIN ISO 10816-3
19