Care And Cleaning - Breville Bar Italia ESP4 Instructions For Use Manual

CARE AND CLEANING

IT IS ESSENTIAL TO CLEAN
THE STEAM SYSTEM AFTER
EACH USE
• Ensure the Selector Control is in the
'STANDBY' position and the steam
pressure has been released.
• Remove the froth enhancer from the
steam tube and nozzle for cleaning and
wipe the steam tube and nozzle with a
damp cloth
• Remove the steam nozzle from the steam
tube by unscrewing in a counter-
clockwise direction using the cleaning
tool provided (Fig B). Clean the steam
nozzle by removing it and letting water
run through it for about 10 seconds in the
direction opposite to the normal steam
flow. If the nozzle is still blocked clean it
with the other end of the cleaning tool
provided (Fig C).
• Turn the Selector Control to 'STEAM'
and allow the appliance to produce steam
for 4-5 seconds to clear the steam tube.
The filter holder does not have to be
fig 8
locked into position.
• Turn the Selector Control to 'STANDBY',
switch off at the power outlet, remove the
plug and allow the appliance to cool.
• Remove all steam pressure by following
the instructions on Page 11.
• After the steam pressure has been
All manuals and user guides at all-guides.com
released, remove the water tank cap and
discard the remaining water (always
empty the water tank between uses).
• The steam nozzle must be screwed back
onto the steam tube in a clockwise
direction and tightened using reasonable
force with the end of the cleaning tool
provided.
• The filter holder, stainless steel filters
and drip tray can be washed with soapy
water. The drip tray consists of 2 parts
and can be removed for easier cleaning.
(Fig D).
fig B
Do not place any of the
components in the dishwasher.
fig D
fig C
13