Breville Bar Italia ESP4 Instructions For Use Manual page 9

OPERATING YOUR BREVILLE ESPRESSO/CAPPUCCINO MAKER
BREWING THE COFFEE
The twin nozzle filter holder allows you to
make either one or two espresso coffees
at a time.
• Make sure the drip tray is in place. Place
empty coffee cups on the drip tray under
the filter holder.
• Make sure the Brew/Steam Selector
Control is in the 'STANDBY' position.
• Plug the power cord into a 230/240v
power outlet and switch on.
• The red power 'On' light will illuminate
when the appliance has been switched on
at the power outlet and the cup warming
plate will start heating.
• Rotate the Selector Control to the 'BREW'
position . The orange heating light will
illuminate to let you know the water is
heating. Coffee will begin to flow into the
cups in approximately five minutes.
• The Pressure Indicator Button on the
All manuals and user guides at all-guides.com
Water Tank Cap will rise when sufficient
steam pressure is achieved.
• When sufficient coffee has flowed into the
cups, turn the Selector Control back to
the 'STANDBY' position. This will stop the
flow of coffee.
• If you are not continuing to using the
steam function, switch off at the power
outlet, unplug the power cord, remove all
pressure and allow the appliance to cool.
• Do not remove the water tank cap or filter
holder until the steam pressure in the
appliance has been released. The
Pressure Indicator Button should drop
down and be flush with the top of the
water tank cap.
The steam pressure in the
machine must be released
each time BEFORE re-filling
with fresh cold water.
9