Breville Bar Italia ESP4 Instructions For Use Manual page 16

OPERATING YOUR BREVILLE ESPRESSO/CAPPUCCINO MAKER
HOW TO RELEASE THE
STEAM PRESSURE
• Switch the power off at the power outlet
and unplug the power cord.
• Place the frothing jug under the steam
nozzle.
• Turn the selector control to the 'STEAM'
position and allow all steam and
residual water to completely drain off into
the jug until all flow and sound ceases.
The steam pressure is now removed.
• Turn the selector control to the 'BREW'
position to ensure steam pressure is
removed, then turn back to the 'STANDBY'
position.
• The Pressure Indicator Button should drop
down and be flush with the top of the
water tank cap. (See Fig.5)
THE METAL PARTS OF THE FILTER HOLDER MIGHT STILL BE VERY HOT.
COOL DOWN THESE PARTS BY RUNNING UNDER COLD WATER.
TO AVOID POSSIBLE BURNS FROM HOT STEAM AND WATER, NEVER
REMOVE THE WATER TANK CAP OR THE FILTER HOLDER WHILE THERE
IS STEAM PRESSURE IN THE WATER TANK. REMOVE ALL STEAM
PRESSURE FIRST.
NEVER LET COFFEE OR WATER LEVEL IN A CUP REACH THE POURING
NOZZLE OF THE FILTER HOLDER.
All manuals and user guides at all-guides.com
fig 5
• After the steam pressure has been
released, remove the filter holder from the
brew head. Using the filter retainer clip to
secure the filter in the filter holder, turn
the filter holder upside down to empty
used coffee (used coffee grounds should
be thrown away with domestic waste and
not down the sink which may block
drains). Rinse the filter and filter holder
with water and allow to dry.
pressure
indicator down
11