Breville Bar Italia ESP4 Instructions For Use Manual page 8

OPERATING YOUR BREVILLE ESPRESSO/CAPPUCCINO MAKER
PREPARING THE COFFEE
• Remove the filter holder by rotating 45
degrees to the left (Fig 2 ).
fig 2
• Place the 2 or 4 cup filter into the filter
holder and use the measuring spoon to
fill the filter with ground espresso coffee
to the required cup level marking inside
the filter (use the smaller filter for 1 or 2
cups and the larger filter for 2 or 4 cups).
Do not fill above the 2 or 4 cup mark.
• Distribute the ground coffee evenly and
press it lightly with the measuring spoon
(Fig 3 and 4). Too much coffee can block
the flow of water.
THE METAL PARTS OF THE FILTER HOLDER MIGHT STILL BE VERY HOT.
COOL DOWN THESE PARTS BY RUNNING UNDER COLD WATER.
TO AVOID POSSIBLE BURNS FROM HOT STEAM AND WATER, NEVER OPEN
THE WATER TANK CAP WHILE THERE IS PRESSURE IN THE WATER TANK.
REMOVE ALL PRESSURE FIRST.
NEVER LET COFFEE OR WATER LEVEL IN A CUP REACH THE POURING
8
NOZZLE OF THE FILTER HOLDER.
All manuals and user guides at all-guides.com
• Clean any excess ground coffee from the
rim of the filter holder to ensure a proper
fit under the brew head.
• Place the filter retainer clip in the release
position by pulling the clip back towards
your hand.
• Place the filter holder underneath the
brew head so that the handle is
positioned to the left of centre. Lift the
filter holder until it contacts the brew
head and rotate to the right.
correct
(level)
fig 3
Incorrect
(Heaped)
fig 4