Honda EM10000 Owner's Manual page 48

Table of Contents

Advertisement

11/12/06 12:57:23 42Z26700_048
SERVICING YOUR GENERATOR
4.
Clean the filter elements if they are to be reused.
Paper filter element: Tap the filter element several times on a hard
surface to remove dirt, or blow compressed air [not exceeding 207
kPa (2.1 kgf/cm , 30 psi)] through the filter element from the air
cleaner case side.
Never try to brush off dirt; brushing will force dirt into the fibers.
Replace the paper filter element if it is excessively dirty.
Foam filter element: If the foam filter is dirty, clean it as described on
page
47
. Replace the foam filter if it is damaged.
5.
Wipe dirt from the inside of the air cleaner body and cover, using a
moist rag. Be careful to prevent dirt from entering the air chamber
that leads to the carburetor.
6.
Place the foam filter element over the paper filter element, and
reinstall the assembled filter element. Be sure the packing is in place
beneath the filter element. Tighten the wing nut securely.
7.
Lock the air cleaner cover latch securely.
8.
Close the maintenance cover.
Operating the engine without an air filter, or with a damaged air filter,
will allow dirt to enter the engine, causing rapid engine wear.
46

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Et12000

Table of Contents