Honda EM10000 Owner's Manual page 21

11/12/06 12:53:54 42Z26700_021
Power Output Voltage
EM10000:
This mode displays an approximate single-phase output voltage.
ET12000:
This mode displays an approximate three-phase output voltage when
the three phases are used or an approximate single-phase output
voltage when the single phase is used.
The output voltage is expressed in V (volts). The output voltage value
is not an exact measurement and should be regarded as a reference
only.
EM10000:
(Example: K type)
Battery Voltage
This mode displays the battery condition, expressed in Volts DC.
The battery voltage can be displayed from 8 V up to 16 V.
When the battery voltage is less than 8 V, the i-Monitor shows 8 V.
When above 16 V, 16 V is shown.
In this generator, the engine will not start if the battery is removed.
Also, if the battery is disconnected when the generator is operating,
the engine will stop.
CONTROLS & FEATURES
ET12000:
19