Daikin EUWL KZW1 Series Service Manual page 75

ESIE-0303
Key
pu
(1)
: The initialisation key can be bought as a spare part. There is one type for all micro controllers. You
have to program it yourself by configuring the settings you want on a micro controller, and then copying
these settings into the key. As soon as you have done this, you can copy the settings to other micro
controllers.
LEDs The table below contains an overview of the LEDs and their functions.
LED
With:
Item
Part 2 – Functional Description
The Digital Controller: EUW5-24KZW1 and EUWL5-24KZW1
Function
■ The key is copied into the unit EEPROM after pressing both keys and then
(1)
powering the unit .
Function
The compressor is inactive.
Although extra load is requested, the compressor cannot start up.
The compressor is active.
Heating mode is active (only for heat pump).
Cooling mode is active.
The value on the numeric display should be multiplied by 100.
Can be used as service indication (parameter cb). See "cb" on page 2–17.
Description
Flashing
ON
OFF
1
2
3
4
5
2–13