Revolution 224854 User Instructions page 10

4.4 POSITIONING OF TRAYS AND/OR GN CONTAINERS IN THE OVEN CHAMBER
To ensure optimum hot air circulation:
• Don't position the tray or GN container against
the fan
USE OF APPLIANCE
READ THIS USER'S MANUAL CAREFULLY. IT CON-
TAINS IMPORTANT INFORMATION ABOUT THE SAFE
INSTALLATION, USE AND MAINTENANCE OF THE
APPLIANCE. THE MANUFACTURER AND THE SUP-
PLIER OF THE APPLIANCE DISCLAIM ANY LIABILITY
FOR ANY LOSS RESULTING FROM FAILURE TO OB-
EN
SERVE THESE GUIDELINESS.
For service, contact an authorised service personnel
or the supplier. The appliance is intended for profes-
sional use and must be operated by properly qualified
OVEN CONTROLS: REVOLUTION 224854
E - operating humidity
button
B - time function indicator
10
• Position them evenly and in the middle in the
oven chamber
and trained personnel. This appliance has been desi-
gned for preparing meals. It is intended for industrial
use only. Any other use will be considered as misuse.
During the first use, leave the baking chamber empty,
set it to maximum temperature and turn on the oven
for about 30 minutes in order to remove any residue
grease. Before starting the operation, heat up the ba-
king chamber. It is essential and the heating should
start at least 10 minutes prior to inserting a food tray
in the chamber of the oven.
A - cooking time control knob
C - temperature control knob
D - heater operation indicator