Audio Player; Setting Up A Bluetooth Connection With Mobile Devices - Omnitronic MES-12BT2 User Manual

Audio Player

The audio player can either be operated via the buttons on the front panel or via the remote control. When
actuating a button, always direct the remote control towards the sensor. There must be no obstacles
between remote control and the sensor. If the range of the remote control decreases, the battery is probably
exhausted and must be replaced.
1
Insert a USB device into the USB port and/or a memory card into the card slot.
2
After loading a data carrier, it is selected as the playback medium and the playback will start
automatically. The display indicates "► ". During the playback, the display indicates the elapsed time of
the current title in minutes and seconds. Additionally, the file name will be scrolling across the display.
3
Adjust the desired volume for the audio player with the BLUETOOTH/MP3 LEVEL control.
4
To interrupt the playback, press the button [► ]. The display indicates " ". To stop the playback, press
the button [ ]. The display indicates " ". After pressing the button [► ], playback will start from the
beginning of the title.
5
By short actuation of the buttons [
long actuation of the buttons, fast forward and reverse is activated.
6
Use the buttons [
player.
7
For muting the sound, press the button [
8
For direct selection of a title with the numerical keys [0-9] on the remote control, enter its number.
9
With the button [
• indication "NOR": normal play
• indication "RALL": continuous repeat of all titles of the data carrier (basic setting)
• indication "RONE": continuous repeat of the selected title
• indication "FOLD": continuous repeat of the selected folder (not available)
• indication "RAN": the titles are played in random order
10
Short repeated actuation of the button [EQ] selects an equalizer setting: "POP", "JAZZ", "CLAS", "COV" or
"BAS". When set to "NOR", the frequency response is not affected.
11
To remove a USB device, disconnect it from the USB port. To eject a memory card, slightly press it into
the slot until it comes out and can be removed. Prior to removing a device, always terminate the
playback with the buttons [►II] or [ ]. Otherwise damage or loss of data may occur.

Setting up a Bluetooth Connection with Mobile Devices

The audio player features a Bluetooth receiver allowing you to stream music wirelessly from your mobile
devices such as smartphones, tablets and notebooks.
1
Press the [MODE] button (repeatedly) until the display indicates "
enter the pairing mode.
2
Activate the Bluetooth function at the Bluetooth source. The PA system is indicated by "
on the display of the Bluetooth source. Pair the devices with each other. The audio player's display
BT CONNECTING
indicates "
3
Now play music at the Bluetooth source as you normally would and the sound will come out of the PA
system.
4
The Bluetooth source may also be operated via the audio player. To interrupt or continue the playback,
press the button [► ].With the buttons [
] and [
] and [ ] on the remote control to adjust the internal volume level of the audio
]. To switch on the sound again, press the button once again.
], you can activate random play and repeat functions.
".
] and [
] you can skip titles in forward or backward direction. By
BT NOT LINK"
] you can skip titles in forward or backward direction.
27
. The audio player will
OMNITRONIC
"