Audio Player; Setting Up A Bluetooth Connection With Mobile Devices - Omnitronic WAMS-65BT User Manual

Audio Player

The audio player can either be operated via the buttons on the front panel or via the remote control.
However, via the remote control it is not possible to browse the folders on a storage medium.
1
Insert a USB device into the USB port and/or a memory card into the card slot. Shortly press the button
[MODE] to switch between the data carriers. The display indicates the source selected. After loading a
data carrier, it is selected as the playback medium and the playback will start automatically. If a data
carrier is not recognized at the first try, remove it and insert it again.
2
Use the buttons [VOL-] und [VOL+] on the player (long actuation) or the buttons [+] and [‒] on the
remote control to adjust the basic volume level of the audio player. Then mix the player's signal to the
master signal with the [BLUETOOTH/MP3] level control.
3
To interrupt the playback, press the button [► ].
4
By short actuation of the buttons [
select folders, the folder selection mode must be activated first with the [FOLDER] button. By long
actuation of the [
5
For direct selection of a title with the numerical keys [0-9] on the remote control, enter its number and
confirm with the button [PICK SONG].
Example: For title number 27 press keys [2], [7] and [PICK SONG].
6
With the button [REPEAT] on the player or [ENTER] on the remote control, you can activate random
play and repeat functions.
• first actuation: continuous repeat of the selected folder (indication "Fold")
• second actuation: continuous repeat of the selected title (indication "One")
• third actuation: the titles are played in random order (indication "Rand")
• fourth actuation: continuous repeat of all titles of the data carrier (indication "All")
7
Short repeated actuation of the button [EQ] selects an equalizer setting.
8
To remove a USB device, disconnect it from the USB port. To eject a memory card, slightly press it into
the slot until it comes out and can be removed. Prior to removing a device, always terminate the
playback with the buttons [►II]. Otherwise damage or loss of data may occur.

Setting up a Bluetooth Connection with Mobile Devices

The audio player features a Bluetooth receiver allowing you to stream music wirelessly from your mobile
devices such as smartphones, tablets and notebooks.
1
Press the [MODE] button (repeatedly) until the display indicates "
pairing mode.
2
Activate the Bluetooth function at the Bluetooth source. The PA system is indicated by "
on the display of the Bluetooth source. Pair the devices with each other. Once the devices are paired, a
beep will sound.
3
Now play music at the Bluetooth source as you normally would and the sound will come out of the PA
system.
4
The Bluetooth source may also be operated via the audio player. To interrupt or continue the playback,
press the button [► ]. With the buttons [
direction.
] and [
] and [ ] buttons, fast forward and reverse is activated.
] you can skip titles in forward or backward direction. To
bt"
] and [ ] you can skip titles in forward or backward
24
. The audio player will enter the
OMNITRONIC
"