Advertisement
Light Bulb Replacement
Take care not to touch the new bulb with your fingers – use foam packing or paper towel to hold the bulb.
Note the location of the light bulb under the top left corner of the face.
1. Remove the two screws securing the cover plate and screen that conceal the light. Set the screws, plate, and
screen aside.
2. Remove the spent bulb. Wrap the new bulb in foam packing or paper towel and insert it into the socket.
3. Before replacing the cover plate and screen, insert the screws through the plate into the screen (see picture
below. This makes it easier to attach the screen and cover plate.
4. Attach the screen and cover plate using the screws removed in step 1.
Page 7 of 7
Large Flush Wood Hybrid-Fyre Insert:
Cypress Face Installation
17601689 - Printed 4/10/12
(96400539)
© Travis Industries, Inc.
Advertisement
