Executing Program; Run Program - Fujitsu MB95100 Series Application Note

MB2146-09 – Installation Guide
Chapter 4 Setting up the Emulation Software

4.3 Executing Program

4.3.1 Run Program

1. Turn on the user power to the MB2146-401.
2. The MB2146-09 POWER LED turns orange.
3. Double-click emulator_usb.sup (or however you named setup file before) in the
debug folder in the project window to start the emulator debugger.
4. Reset MCU before executing the program.
5. Run your user program.
6. To stop user program click the marked button.
MCU-AN-395002-E-V10 - 20 - © Fujitsu Microelectronics Europe GmbH