Storage; Cleaning; Wallbe Warranty And Support - Wallbe Pro 3,7kW Installation And User Manual

Safety note
Danger: Never unplug the vehicle connector in any case with violence.
Dangerous arcs can lead to death or serious injuries. Depending on the charging station and
the electric vehicle the termination of the charging Process and the duration of unlocking
may vary.
• Never charge with a damaged charging cable or vehicle-inlet.
• Never charge with dirty or wet contacts.
• Only connect the charging cable to vehicle-inlets that are Protected against water,
humidity and other liduids.
• Some electric vehicles allow the start of the vehicle while the charging cable is still
connected. Please make sure that your charging cable isn't connected to your car to
avoid damage or injury.
• Never use the charging cable with an extension or adaptor.
• Never touch a melting or smoking charging cable. Terminate the charging Process
and let the charging cable cool down.
• Please make sure that children have no access to the charging cable. The charging
cable should only be operated by people with a valid drivers license.

9.1.1 Storage

Store the charging cable with the Protective cap on it at a dry and clean place.
Alternatively you can store the vehicle connector in the parking position of your wallbe Pro if
you have ordered it with a tethered charging cable.

9.1.2 Cleaning

1. Never clean a connected charging cable.
2. Never clean the charging cable and its contacts with a wet tissue.
3. Never clean the charging cable using aggressive detergents, water- or steam jet
cleaners.
4. Never submerge the charging cable into liquids of any kind.
30

10.0 wallbe warranty and support

wallbe GmbH – Paderborner Str. 76 – 33189 Schlangen
Tel: +49 5252 989440 Mail: inquiry@wallbe.de