Led Indicator Table - Synology RackStation RS820RP+ Hardware Installation Manual

LED Indicator Table

LED Indicator
Power
STATUS
ALERT
Drive Status 1-4
Rear LAN
(on right side of jack)
Rear LAN
(on left side of jack)
Redundant Power
Model specifications are subject to change without notice. Please refer to
Note:
1
Please try to restart your Synology NAS or re-insert the drive(s), and then run the HDD/SSD manufacturer's diagnostic tool to check the health status of
the drive(s). If you can log into DSM, please run the built-in S.M.A.R.T. test to scan the drive(s). If the problem remains unresolved, please contact Synology
Technical Support for help.
20 Chapter 2: Hardware Setup
Color Status
Static
Green
Blinking
Off
Green Static
Orange Blinking
Off
Orange Blinking
Off
Static
Green
Blinking
Orange Static
Off
Green Static
Orange Static
Off
Static
Green
Blinking
Off
Green Static
Off
www.synology.com
Description
Powered on
Booting up / Shutting down
Powered off
Volume normal
Volume degraded / Volume crashed
Volume not created
DSM not installed
HDD hibernation
Fan failure / Over temperature
System normal
Drive ready and idle
Accessing drive
1
Drive error
No internal drive
1 Gbps connected
100 Mbps connected
10 Mbps connected / No network
Network connected
Network active
No network
Power supply is ready
No power supply
for the latest information.