Table of Contents
Advertisement
LED Indicator Table
LED Indicator
Drive Status Indicator
(on tray)
STATUS
Front LAN
2
Copy Button
Power
Rear LAN
(on upper side of jack)
Rear LAN
(on lower side of jack)
Note:
Model specifications are subject to change without notice. Please refer to
1
Please try to restart your DiskStation or re-insert the drive(s), and then run the HDD/SSD manufacturer's diagnostic tool to check the
health status of the drive(s). If you can log into DSM, please run the built-in S.M.A.R.T. test to scan the drive(s). If the problem remains
unresolved, please contact Synology Technical Support for help.
2
The Copy Button LED works only when USBCopy is enabled. To enable USBCopy, go to DSM > Control Panel > External Devices >
USBCopy/SDCopy.
12
Color
Status
Static
Green
Blinking
Orange
Static
Off
Green
Static
Orange
Blinking
Off
Static
Green
Blinking
Off
Static
Green
Blinking
Off
Static
Blue
Blinking
Off
Static
Green
Blinking
Off
Green
Static
Orange
Static
Off
Description
Drive ready and idle
Accessing drive
Drive error / Port disabled
No internal drive
Volume normal
Volume degraded / Volume crashed
Volume not created
DSM not installed
HDD hibernation
Network connected
Network active
No network
Device detected
Copying data
No device connected
Powered on
Booting up / Shutting down
Powered off
Network connected
Network active
No network
Gigabit connection
100 Mbps connection
10 Mbps connection / No network
www.synology.com
for the latest information.
B
Appendix
1
Advertisement
Table of Contents
