Table of Contents
Advertisement
LED Indicator Table
LED Indicator
STATUS
Front LAN
DISK 1-2
Power
This table is applicable to Synology NAS running DSM 6.2.3 and earlier. For DSM 6.2.4 and above, please refer to
Note:
1
Please try to restart your Synology NAS or re-insert the drive(s), and then run the HDD/SSD manufacturer's diagnostic tool to check the health status of the
drive(s). If you can log into DSM, please run the built-in S.M.A.R.T. test to scan the drive(s). If the problem remains unresolved, please contact Synology
Technical Support for help.
11 Chapter 2: Hardware Setup
Color
Status
Green
Static
Orange
Blinking
Off
Static
Green
Blinking
Off
Static
Green
Blinking
Orange
Static
Off
Static
Blue
Blinking
Off
Description
Volume normal
Volume degraded / Volume crashed
Volume not created
DSM not installed
HDD hibernation
Network connected
Network active
No network
Drive ready and idle
Accessing drive
Drive error / Port disabled
No internal drive / HDD Advanced Hibernation
Powered on
Booting up / Shutting down
Powered off
this article
for the latest information.
1
Advertisement
Table of Contents
