Install DSM on Synology NAS
After hardware setup is finished, please install DiskStation Manager (DSM) – Synology's browser-based
operating system – on your RS820+ / RS820RP+.
Install DSM with Web Assistant
Your RS820+ / RS820RP+ comes with a built-in tool called
version of DSM from the Internet and install it on your RS820+ / RS820RP+. To use Web Assistant, please follow
the steps below.
1 Power on your RS820+ / RS820RP+.
2 Open a web browser on a computer connected to the same network as the RS820+ / RS820RP+.
3 Enter either of the following into the address bar of your browser:
a
find.synology.com
b
synologynas:5000
4 Web Assistant will be launched in your web browser. It will search for and find the Synology NAS within the
local network. The status of the RS820+ / RS820RP+ should be
5 Click
Connect
to start the setup process and follow the onscreen instructions.
Note:
1. The Synology NAS must be connected to the Internet to install DSM with Web Assistant.
2. Suggested browsers: Chrome, Firefox.
3. Both the Synology NAS and the computer must be in the same local network.
6 If you accidentally leave the installation process before it is finished, log in to the DSM as admin (default
administrative account name) with the password left blank.
Learn More
Congratulations! Your RS820+ / RS820RP+ is now ready for action. For more information or online resources
about your RS820+ / RS820RP+, please visit www.synology.com.
22
Web Assistant
that helps you download the latest
Not
Installed.
4
Chapter