Led Indicator Table - Synology NAS DS220+ Hardware Installation Manual

LED Indicator Table

LED Indicator
Power
STATUS
LAN
Disk 1-2
2
Copy
Rear LAN
(on upper side of jack)
Rear LAN
(on lower side of jack)
Note: Model specifications are subject to change without notice. Please refer to
1
Please try to restart your Synology NAS or re-insert the drives, then run the HDD/SSD manufacturer's diagnostic tool to check the health status
of the drives. If you can sign in to DSM, please run the built-in S.M.A.R.T. test to scan the drives. If the problem remains unresolved, please
contact Synology Technical Support for help.
2
For models with Copy Button, the USB Copy package is installed on your DSM by default.
5 Chapter 1: Before You Start
Color Status
Static
Blue
Blinking
Off
Green Static
Orange Blinking
Off
Static
Green
Blinking
Off
Static
Green
Blinking
Orange Static
Off
Static
Green
Blinking
Off
Static
Green
Blinking
Off
Green Static
Orange Static
Off
www.synology.com
Description
Powered on
Booting up/Shutting down
Powered off
Volume normal
Volume degraded/Volume crashed
Volume not created
DSM not installed
HDD hibernation
Network connected
Network active
No network
Drive ready and idle
Accessing drive
Drive error/Port disabled
No internal drive/Advanced HDD hibernation
Device detected
Copying data
No device connected
Network connected
Network active
No network
1 Gbps connection
100 Mbps connection
10 Mbps connection/No network
for the latest information.
1