Wallbox Pulsar Installation Manual page 7

Product information
1
Family Model
WB PL
Your Wallbox box should contain the following:
Components
• Wallbox Pulsar with charging cable
• Plug holder
• Installation guide
• Mounting parts
• Drilling template
• Opening tool (I-1)
Following tools will be required while mounting your Wallbox:
Tools required
• Phillips Screwdriver
• Drilling machine plus 10 mm drill bit
• Cutter or wall cable cutter
• Torx T9
• Opening tool (I-1)
Cable EVC
0 - 5m 1 - Type 1
M - 7m 2 - Type 2
Mounting parts
• 3x 6.3x40mm Screws
• 3x Ø8mm Wall anchors
• 1x RutaSeal® sealing
• 3x Rubber Stoppers
1 Part number
2 EAN code
3 Unique identification code
4 Serial number
5 Electricity supply configuration
6 Manufacturing country
Power Version
1 - 3. 7 kW -
2 - 7.4kW
3 - 11kW
4 - 22kW
I-1: Opening tool
Custom Revision
- -
7