Explanation Of The Symbols In The Display; Display - Unold 68456 Instructions For Use Manual

EXPLANATION OF THE SYMBOLS IN THE DISPLAY

Time selection
Kneading
Rests
Rising
Kneading phase or rest
phase

DISPLAY

BASIC SETTING:
As soon as the appliance is plugged into the electrical
outlet, the display shows 2:55 (the colon between the
numbers does not flash). Program 1 (basic), the medium
browning level and the bread weight 750 g, are displayed.
During operation, the program status is indicated both by
the time countdown and the symbols on the display. The
information means:
34
Weight value for the bread
Browning
light/medium/dark
Kneading (1+2) = appears when the appliance
is in the kneading phase.
RISING (1-3) = indicates the different rising
phases.
BAKING = the bread is backing.
KEEP WARM = the bread will kept warm for 1
more hour.
The following messages on the display indicate an error:
HHH: If this appears after pressing the START/STOP but-
ton the appliance is still too hot from the last baking cycle.
Open the lid and allow the appliance to cool for another 10
to 20 minutes.
E E0 and E E1: This message indicates a defect in the
temperature sensor. Please have the appliance inspected
by our service department.
Menu selection
Pre-heating
Baking
Time progression
Keeping warm
Program end