Cliq Web Manager Einrichten - Assa Abloy CLIQ Bluetooth Pairing Manual

Android
I
EN
36
The Mobile PD firmware can only connect with smart devices running Android
version 4.0 (ICS) or higher.
To find the Android version on your smart device:
1 Start the Settings app.
2 Choose About phone.
 You can identify the Android version of your device.

CLIQ Web Manager einrichten

Before pairing the Mobile PD with a PAN enabled smart device, do the following
in CLIQ Web Manager:
Note!
Changes to the connection settings must be transferred via cable to the mo-
bile programming device: If the Mobile PD connection settings are changed, the
new configuration needs to be installed in the Mobile PD using a USB on-the-go
cable. For more information, see the user guide for CLIQ Web Manager.
1 Make sure that the Mobile PD Bluetooth settings are empty (not configured
for DUN, see "DUN support", page 55).
2 Verify that the Mobile PD firmware is upgraded to at least version 2.10.0.
Firmware 2.10.0 (or higher) supports Bluetooth connection to smart devices.
 You have set up the CLIQ Web Manager.
Bluetooth pairing guide (PAN)