Yealink CP920 Quick Installation Manual

Yealink CP920
Quick Installation Guide
Step 1 Register Phone Online
You must first register the Yealink CP920
IP phone to your Ooma Office account by
visiting
http://office.ooma.com/add_ip_phone
and following the steps on the screen.
Introduction
Integrating a Yealink CP920 IP conference phone with
Ooma Office is quick, and can be accomplished in just
a few simple steps.
Package Contents
IP conference phone
Step 2 Connect Phone
to Network
Use the Ethernet cable to connect the
INTERNET port on the back of the
Yealink CP920 IP phone to an available
wired Internet connection.
Yealink CP920 Ethernet cable
Step 3
Connect the phone power supply and plug
it into an AC outlet if you are not using
Power over Ethernet.
Once powered on, the phone will initialize
automatically. This process will take several
minutes, during which the phone may
restart a few times.
Once you see the extension name and
number displayed on the screen, the
phone is ready to make and receive calls.
For best results, place the phone in the
center of the room in which it will be used.
Power adapter
Power Phone
710-0186-100