Operation; Settings - Silvercrest Quick Curl SHC 240 B2 Operating Instructions Manual

Operation

NOTE
► You may notice a slight smell when using the appliance for the first time .
This is normal and the smell dissipates after a short time .

Settings

NOTE
► All buttons except the Release button 8 and the Start button u sound a
beep when pressed .
1) Insert the plug into a mains power socket . You will hear a beep, and OFF
appears on the display .
2) Press the On/Off button
display 7 flashes . The set temperature flashes several times before the current
temperature is displayed . The appliance now heats up and the current tempera-
ture rises . As soon as the set temperature is reached, you will hear 2 beeps
and Temperature 7 will light up permanently .
NOTE
► The set temperature may be briefly exceeded occasionally and then drop
again . This happens because the appliance is trying to maintain the set
temperature and reheats repeatedly .
3) Press the Temperature button
the display . The temperature depends on your hair type:
Temperature
NOTE
► If you are not sure what temperature is ideal for your hair, increase the
temperature gradually . Start with a low temperature and increase the
temperature until you are happy with the result .
■ 8 │ GB │ IE │ NI
r . You will hear a beep and the temperature
130°C
150°C
170°C
190°C
210°C
230°C
0 until the desired temperature appears on
Hair type
very fine, stressed and damaged hair
fine hair
normal hair
wavy hair
thick or wavy hair
thick, curly hair
SHC 240 B2