Adjusting To Conform To External Unit - TechniSat VIACCESS DigiBox VIACCESS Instruction Manual

Technisat digibox viaccess intruction manual
Table of Contents

Advertisement

Your DVB receiver has the facility to display sub-titles. Provided the function Sub-titles has
been enabled, and the preferred language selected in terms of the Audio signal selection is
available, the sub-titles will be superimposed on the picture automatically. If the function has
not been enabled, it can be set manually, Sub-titles are indicated by the symbol
information display. Please also refer to Point 6.12 in this instruction manual.
5.4 Adjustments for the External Unit
Once you have made all the individual selections, to make the receiver conform to your pre-
ferences, it may still be necessary to make some adjustments for the receiver to work opti-
mally with your antenna/satellite dish. The default factory setting is pre-programmed for
reception of ASTRA and EUTELSAT broadcasts by means of a universal LNB (see Glossary
at end for technical terms). Once the receiver has been connected to an external reception
unit and switched on, these programmes can be received without any further adjustments.
Should you also wish to receive signals from other satellites, or if you have a different type of
LNB, you can make the following adjustments in your receiver to provide for these program-
mes:
>
Press the
>
Use the
>
Confirm by pressing the
The menu
>
Now use the
>
Confirm by pressing the
The menu
key to display the
keys to select the entry
key.
will be displayed.
keys to select the entry
key.
will be displayed.
15
in the
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digibox viaccess

Table of Contents