Input Voltage; Troubleshooting Guide; Annexure - TechniSat S1 Operating Manual

Bed_anl_.qxd 20.02.04
Function
LNC power supply:
LNC power
LNC voltage vertical
LNC voltage horizontal
22 kHz modulation:
Programme memory/satellite positions:
No. of programmes Favourites list TV:
No. of programmes Favourites list Radio:
Number of programmes:
Total list TV/Radio:
DiSEqC:
DiSEqC 1.0 and DiSEqC 1.2
SFI data:
SFI preview:
Timer:
Events:
Remote control system:
Subsystem address
Modulation frequency
Infrared wavelength
Power supply:
Mains adapter:
Power requirement:
10 W
16 W
23 W
32 W
Nominal voltage:
230 V / 50 Hz alternating current

Input voltage:

180 V.... 250 V / 50 Hz alternating current
General:
Dimensions (WxDxH):
Weight:

12 Troubleshooting guide

13 Annexure

16:30 Seite 67
Update for operating software and pre-pro-
gramming
400 mA max.; double insula
ted
<14,0V no load, > 11,5 V at 400
mA
< 20 V no load, > 17,2 V at 400
mA
LNC switched off in standby mode
22 kHz, Amplitude 0.6 V +/- 0.2 V
999 TV programmes
999 Radio programmes
In total 6000 programmes can be
stored in the Total list
maximum 7 days in advance
maximum 124 events, one year in advance
RC-5
8 (SAT 1), 10 (SAT 2)
36 kHz
950 nm
in standby mode
in operation, excl. LNC
recording mode, excl. LNC
recording mode / 400mA LNC cur-
rent
370 mm x 220 mm x 65 mm
approx. 2,7 kg
67
(Fig. 9-13)
(Fig. 9-14)
(Fig. 9-15)
(Fig. 9-16)
(Fig. 9-17)