TechniSat S1 Operating Manual page 49

Bed_anl_.qxd 20.02.04
8-10)
Use the up/down arrow keys to move the marker
>
around within the menu, and change the individual
positions. When selecting a menu item please note
any additional messages displayed on screen.
8.3.1 Changing the unit PIN
The unit PIN code is set at the factory to 0000.
Press OK to display the menu used to change the
>
unit PIN code. (Fig. 8-11)
Now use the numeric keys to enter the current unit
>
PIN code (Default setting 0000).
Using the numeric keys, enter the desired new unit
>
PIN code.
> Repeat the code entry.
> When you have completed changing the unit PIN
code in this manner you will automatically be taken
back to the Parental Control menu.
Note!
Do not forget your unit PIN code. If you should forget
it, please consult your specialist retailer!
8.3.2 Mode
In this line, use the left/right arrow keys to select
>
parental control on or off.
8.3.3 Selecting a programme
Press OK. The Favourites list of the current mode (TV
>
or Radio) will be displayed. The currently selected pro-
gramme is marked. (Fig. 8-12)
Press the green function key to switch between the
>
TV and Radio lists.
Press the red function key to open a selection win-
>
dow. Here you have the choice of selecting the des-
ired programme list type.
Use the up/down arrow keys to select the desired
>
programme type (e.g. Favourites list).
Confirm by pressing OK. The programme list selected
>
will be displayed.
Now use the arrow keys to mark the programme to
>
which you wish to block the access.
Block the programme by pressing the yellow function
>
key. The parental control symbol
to the programme selected.
> To block several programmes simultaneously, mark
these as described in Point 8.1.2 (Marking blocks of
programmes) and block them by pressing the yel-
low function key.
> When you have completed configuring the programme
16:29 Seite 49
will appear next
49
(Fig. 8-5)