Advertisement
2
SETUP
–
Mount the footrests with the springs and bolts. Secure the pins with the lock rings.
Pliers for footrest spring (58429083000)
201900-10
–
Mount the reflector.
–
Remove the protective plastic.
–
Carefully loosen and remove the tensioning belt over the swingarm.
Info
An assistant prevents the motorcycle from falling over.
–
Carefully loosen and remove the tensioning belts around the lower triple clamp.
The vehicle is released at the front.
201901-10
–
Together with an assistant, take the vehicle off the pallet.
–
Mount clip-in nut
tabs. Mount and tighten screw.
Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
–
–
–
–
201902-10
–
–
Fill the battery.
Info
Read the notes in the battery package.
–
Recharge the battery. (
–
Install the battery. (
–
Refuel. (
–
Print out the current PDI form found on KTM DEALER.NET and perform the delivery
inspection.
–
Set kilometers or miles. (
on both sides. Hook the holdings lugs of the covers into the
Keep batteries out of the reach of children.
Wear suitable protective clothing and goggles.
Avoid contact with battery acid and battery gases.
Keep sparks and open flames away from the battery. Only charge in
well-ventilated rooms.
In the event of skin contact, rinse with large amounts of water. If battery
acid gets in the eyes, rinse with water for at least 15 minutes and con-
tact a physician.
p. 5)
p. 6)
p. 7)
p. 7)
4
Advertisement
