Digital; Digital I/O; General - RME Audio ADI-2 FS User Manual

10.2 Digital

Clocks: Internal, ADAT In, SPDIF In
Jitter suppression of external clocks: > 50 dB (2.4 kHz)
Effective clock jitter influence on AD and DA conversion: near zero
PLL ensures zero dropout, even at more than 100 ns jitter
Digital Bitclock PLL for trouble-free varispeed ADAT operation
Supported sample rates with external clocking (SPDIF): 28 kHz up to 200 kHz
Supported sample rates with external clocking (ADAT): 40 kHz up to 49 kHz
Internal clocks: 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz, 176,8 kHz, 192 kHz

10.3 Digital I/O

Digital input coaxial ground-free transformer coupled
Formats: optical (TOSLINK), RCA (SPDIF, AES/EBU compatible)
Format Consumer SPDIF according to IEC 60958
Format Professional according to AES3-1992 Amendment 4
SPDIF coaxial
RCA, according to IEC 60958
High-sensitivity input stage RCA: < 0.2 Vpp input level
Output voltage RCA Consumer 0.7 V, Professional 1.4 V
Single Wire mode, sample rate 28 kHz up to 200 kHz
SPDIF optical
1 x optical, according to IEC 60958
Sample rate 28 kHz up to 200 kHz
ADAT
TOSLINK
Standard: 8 channels 24 bit, up to 48 kHz
Double Speed (S/MUX): 4 channels 24 bit 96 kHz
Quad Speed (S/MUX4) : 2 channels 24 bit 192 kHz

10.4 General

Included power supply: external switching PSU, 100 - 240 V AC, 2 A, 24 Watts
Idle power consumption: 5,2 W (430 mA @ 12V)
Max. power consumption: 10 Watts (830 mA @ 12 V)
Dimensions (WxHxD): 215 x 44 x 130 mm (8.5" x 1.73" x 5.1")
Weight: 900 g ( 2.0 lbs)
Temperature range: +5° up to +50° Celsius (41° F up to 122°F)
Relative humidity: < 75%, non condensing
User's Guide ADI-2 FS © RME
13